Description
Beatbot AquaSense X Robotic Pool Cleaner: The advanced AI-powered, self-cleaning cordless pool robot — from surface to floor, completely hands-free.
-
Automatic Filter Cleaning — AstroRinse™ Station: Self-empties the debris bin and rinses the filter in approximately 3 minutes — a fully automatic filter-cleaning station for a pool robot.
-
22L Debris Capacity: Extra-large debris bin stores up to 3,000 leaves and goes up to 2 months without needing to be emptied.
-
HybridSense® AI Navigation: Powered by 29 state-of-the-art sensors — including an AI camera, infrared, and ultrasonic — AquaSense X maps complex pool shapes, detects 40+ debris types, and optimizes cleaning paths for up to 2x faster cleaning.
-
Complete Pool Cleaning: Cleans the water surface, walls, floors, waterlines, and elevated platforms ≥35 cm (shallow tanning ledges and steps included) for total pool coverage.
-
SmartDrain™ Surface Parking: Automatically returns to the pool edge when cleaning is complete or battery is low, floats on the surface, and releases internal water for effortless retrieval.
-
ClearWater™ Clarification: Uses AquaRefine — a 100% natural, eco-friendly clarifier made from recycled crab shells — to bind fine particles, remove oils, metal ions, and prevent scale buildup for crystal-clear water.
-
App & Voice Control: Monitor status, switch cleaning modes, and manage your pool robot remotely via the Beatbot app while the robot is on the water surface.
-
Automotive-Grade IMR Coating: UV-resistant, heat-insulated protective coating guards against wear, sun exposure, and environmental damage for long-lasting durability.
-
13,400 mAh Battery: Delivers up to 10 hours of continuous surface cleaning on a single charge — enough for even the largest residential pools in a single session.
-
Cordless Wireless Charging: Charges automatically on the AstroRinse™ station after each self-cleaning cycle — no ports, no cords, no manual plugging.
-
Night Cleaning: Dual front LED lights activate automatically in low-light conditions via the AI camera, enabling around-the-clock cleaning.
-
7 Cleaning Modes: Flexible mode selection including AI Quick Mode for fast targeted cleaning and full deep-clean modes for complete pool maintenance.
-
Pool Compatibility: Works in in-ground and above-ground pools of virtually any shape and surface material, including concrete, vinyl, fiberglass, ceramic tiles, stainless steel, and more. Saltwater compatible up to 5,000 ppm.
Tech Specs
Cleaning Performance
Cleaning Coverage: Floor, walls, waterline, water surface, elevated platforms ≥35 cm
Debris Detection: HybridSense® AI — identifies 40+ debris types
Sensor Array: 29 sensors (AI camera, infrared, ultrasonic)
Cleaning Modes: 7 modes including AI Quick Mode
Filtration: Multi-stage — captures leaves, sand, silt, hair, fine particles
Water Clarification: ClearWater™ via AquaRefine (recycled crab shell clarifier)
AstroRinse™ Self-Cleaning Station
Filter Cleaning Time: ~3 minutes (automatic)
Debris Bin Capacity: 22L (up to 3,000 leaves)
Time Between Emptying: Up to 2 months
Charging Method: Cordless wireless (Titanium Safe Charging)
Charging Power: 88W
Weather Resistance: UV and corrosion-resistant, anti-freeze properties
Battery & Runtime
Battery Capacity: 13,400 mAh
Surface Cleaning Runtime: Up to 10 hours
Charging: Automatic cordless via AstroRinse™ station
Surface Parking: Yes — SmartDrain™ automatic water release for easy retrieval
Navigation & Intelligence
AI System: HybridSense® AI
Sensors: 29 (AI camera + infrared + ultrasonic)
Pool Mapping: Yes — learns pool shape automatically
Obstacle Detection: Yes — real-time detection and path adaptation
Night Cleaning: Yes — dual front LEDs activate automatically in low light
Pool Compatibility
Pool Types: In-ground and above-ground
Surface Materials: Concrete, vinyl, fiberglass, ceramic tiles, stainless steel, and more
Saltwater Compatible: Yes — up to 5,000 ppm
Platform Cleaning: Yes — elevated platforms ≥35 cm (tanning ledges, steps)
Connectivity & Control
App: Beatbot (iOS & Android)
Connectivity: Wi-Fi (2.4 GHz)
App Control: Yes — mode selection, monitoring, surface navigation control
Voice Control: Yes
OTA Firmware Updates: Yes
Sustainability
Clarifier: 100% natural, biodegradable (recycled crab shells)
Packaging: Fully recycled cardboard
Coating Process: Spray-free, skin-safe IMR process
About AquaSense X
-
Self-Cleaning Pool Robot Station: AstroRinse™ automatically rinses the filter and empties the debris bin in ~3 minutes — completely hands-free maintenance.
-
2-Month Debris Capacity: 22L bin stores up to 3,000 leaves, drastically reducing how often you need to interact with the robot.
-
HybridSense® AI — 29 Sensors: AI camera, infrared, and ultrasonic sensors work together to map your pool, detect debris on any surface, and adapt cleaning paths in real time.
-
40+ Debris Types Detected: From large leaves and twigs to fine sand and silt — AquaSense X identifies and targets debris across the entire pool.
-
AI Quick Mode: Targets high-debris areas for a faster, more efficient clean — completing the job in nearly half the standard time.
-
Complete All-In-One Coverage: Cleans the surface, waterline, walls, floor, and elevated platforms including shallow tanning ledges ≥35 cm.
-
SmartDrain™ Surface Parking: Automatically surfaces, parks at the pool edge, and drains internal water when done — no manual retrieval effort needed.
-
Dual Front LED Lights: AI-activated night cleaning mode enables 24/7 uninterrupted operation.
-
ClearWater™ + AquaRefine: Eco-friendly clarification system made from recycled crab shells removes oils, metal ions, and fine particles — keeping water crystal clear and skin-safe.
-
Automotive-Grade IMR Coating: UV-resistant, heat-insulated finish protects against wear and environmental exposure for lasting durability.
-
7 Cleaning Modes: From quick surface passes to full deep cleans — a mode for every situation and schedule.
-
Cordless Wireless Charging: Charges automatically on the AstroRinse™ station after every cleaning cycle — 88W fast, safe, and effortless.
Packing List
- Beatbot AquaSense X Robotic Pool Cleaner ×1
- AstroRinse™ Self-Cleaning Station ×1
- AquaRefine™ Clarifying Agent Kit (3-in-1 Clarifier) ×3
- AquaRefine™ Clarifying Agent Kit (Phosphate Remover) ×3
- Extra Debris Bags ×6
- AquaSense X Hook ×1
- AquaSense X Quick Start Guide ×1
- AquaSense X User Manual ×1
What's Free in the Box
- AquaRefine™ 3-in-1 Clarifier Kits ×3 (Free)
- AquaRefine™ Phosphate Remover Kits ×3 (Free)
- Extra Debris Bags ×6 (Free)
FAQ
Q: What makes the AquaSense X different from other robotic pool cleaners?
AquaSense X is a robotic pool cleaner with a fully automatic self-cleaning station (AstroRinse™). It empties its own debris bin and rinses its own filter in ~3 minutes without any manual input. Combined with HybridSense® AI navigation, a 22L debris capacity, and 10 hours of battery runtime, it delivers an exceptionally hands-free pool cleaning experience.
Q: Does AquaSense X clean elevated platforms and steps?
Yes. AquaSense X maps, climbs, and cleans elevated platforms with water depth ≥35 cm, including tanning ledges and shallow steps that most robotic cleaners cannot reach.
Q: Can I control AquaSense X through an app?
Yes. The Beatbot app (iOS and Android) allows you to switch cleaning modes, monitor status, and control surface navigation remotely. App control is available while the robot is on the water surface.
Q: Is AquaSense X compatible with saltwater pools?
Yes. AquaSense X is fully compatible with saltwater pools at concentrations up to 5,000 ppm — well above the range of virtually all residential saltwater pools.
Q: How long does the debris bin last before I need to empty it?
The 22L bin holds up to 3,000 leaves and can go up to 2 months without manual emptying under standard operating conditions, with no noticeable odor buildup.
Q: Is the AstroRinse™ station compatible with other Beatbot models?
No. The AstroRinse™ self-cleaning station is designed exclusively for the AquaSense X and is not compatible with AquaSense 2 series models.
Q: What pool shapes and materials is AquaSense X compatible with?
AquaSense X is suitable for in-ground and above-ground pools of virtually any shape and surface material, including concrete, vinyl, fiberglass, ceramic tiles, and stainless steel.
Q: Does AquaSense X clean at night?
Yes. The AI camera detects ambient light levels and automatically activates dual front LEDs for enhanced visibility, enabling effective cleaning day and night.
Shipping & Returns
Shipping: Orders are generally processed within 2–5 business days, followed by an estimated 5–7 business days in transit. Tracking information is normally provided within 24 hours after the order ships. Standard shipping is available within the contiguous United States. Any mandatory product-specific shipping or delivery charge is displayed during checkout before the order is submitted.
Returns: Eligible items may be requested for return within 30 days of delivery. Conditions, return shipping costs, and a 25% restocking fee apply as described in our policy. Please report visible shipping damage within 7 days of delivery.
Shipping Policy | Refund and Return Policy
Warranty
The Beatbot AquaSense X comes with a 3-Year Full Replacement Protection warranty. If your AquaSense X experiences a covered issue during the warranty period, Beatbot's technical team will assess the unit and arrange either professional repair or a replacement unit (new or refurbished) — ensuring your product continues to perform at its best. Warranty coverage applies to qualifying defects and functional failures under normal residential use.
Warranty claims can be initiated by contacting support at support@therobotdirect.com with your purchase date, product serial number, and a description of the issue.
